How to clean concrete patios? | The complete guide you need to know

As an Amazon Associate, I may earn a commission from qualifying purchases. Please note that you are never charged any extra for that.

When you clean concrete, you want to do it without causing more damage. Corrosive or otherwise harmful chemicals can cause stains and ruin the look of your porch over time. But there are ways to clean concrete without using any chemicals whatsoever! How to clean concrete patios are here to discover.

Let’s get started!

How to clean concrete patios

Things you’ll need:

  • – Soap and water (the Castile kind, not laundry soap)
  • – vinegar
  • – baking soda
  • – rubbing alcohol
  • – a sponge or mop

Here’s how:

1. The first thing you want to do is sweep the surface with a broom or vacuum to remove dirt and dust on top of the concrete. Dirt and dust contain oils that can stain the surface. If you wipe the dirt away, you can avoid stains.

2. Next, take a sharp object like a razor blade or box cutter and scrape off any stickers or tape you may have on your concrete. They make it difficult to clean properly later, so best to get them off now!

3. Fill your sink or a large bucket with warm water and add some dish soap to it (make sure not to use anything too harsh). Soak soap for about an hour or two, and then stir the mixture well.

4. Grab a soft bristle brush and start scrubbing! No need to give too much force here. Move back and forth in a gentle manner, and make sure not to scrub too hard as you can cause damage to the surface of your concrete.

5. Rinse the mop and repeat this process a few times. It takes time, but it works!

6. Dry off your porch with a microfiber cloth or paper towel, and never repeat this process more than twice a year to ensure you don’t damage your concrete!

That’s it! Enjoy your clean, new-looking concrete porch!

If you need a quality mop, check out familygoody.com website for the best recommendations on various mops.

Note: When you’re removing stickers from concrete, be sure not to use anything too harsh and make sure to let it sit for 1-2 days in the sun to remove any residue left behind. You can find stickers and tape removal products at your local hardware or home improvement store.

Also, this is the part where you realize how dirty rags make you look a little silly!

Here’s a video on how to clean concrete patios

Can you use bleach to clean concrete?

Yes! But only in small amounts with a soft, non-abrasive cloth. Again, it would be best if you never used bleach to clean concrete more than once or twice a year.

Can you use muriatic acid to clean concrete?

No! It’s very corrosive and will ruin the look of your porch. Please read the label carefully when purchasing any chemicals and make sure they are safe for use on concrete surfaces. Muriatic acid, for example, is not a safe cleaner for your concrete patio.

Does white vinegar clean concrete?

Yes! White vinegar is a great non-toxic cleaner for your concrete without harsh chemicals. You can find it at your local grocery store, and it should cost you around $2 or $3.

What is the best outdoor concrete cleaner?

Muriatic acid is not the best cleaner for your concrete. You should only use it when necessary, and you should follow the instructions on the label for the best results. You can also try using white vinegar or try a high-quality concrete cleaner available at your local hardware store. You can try searching online for “concrete cleaners.” If you’re lucky, you may find some coupons offered by various companies like Lowe’s or Home Depot.

How Often to Clean Concrete Patios?

It would be best if you only cleaned your concrete patios every two weeks or so. The longer you wait without cleaning, the more damage you’ll do to the surface of your concrete as stains set in.

But by just repeating this process every two weeks, you’re ensuring that any dirt, soap scum, or other contaminants don’t accumulate and ruin the look of your concrete.

How do you get stains out of concrete?

Stains, especially food stains from tomato-based foods like spaghetti and chili, can be hard to get rid of. But the answer might be as simple as a common household cleaner. Try a concrete cleaner first, but if that doesn’t work, try taking some white vinegar and mixing it with water (about a 50/50 proportion) and using that mixture to wipe the spill with an old rag scrub brush. If it still doesn’t come out, then you should use muriatic acid.

How to clean dog urine from a concrete patio?

If you think that your concrete is too porous for you to use muriatic acid, try using plain white vinegar first. If that doesn’t work, try putting the vinegar and some water in a gallon jug and pour it on the spot to clean and disinfect the area. For larger stains or more stubborn areas of urine, use muriatic acid.

Tips:

If you have a large patio, it is important to clean the entire surface before doing this. Make sure to sweep off any trash or other contaminants and then deliver some pressure with the brush and scrub away for a few minutes.

Also, be sure not to leave any soap scum in your mopping solution after you’ve washed your concrete patio. When you’re done with the scrubbing process, make sure to rinse clean and start again with some hot water and dish soap.

Conclusion:

This guide should help you know how to clean your concrete patios properly and the types of cleaners and chemicals you can use.

We hope that this guide helps you keep your concrete surfaces looking new and fresh all year round. Find the tools that care for your lovely lawn.